HTI 2500 W/SE XS
Product family benefits
- High luminance
- High luminous efficacy and efficiency
Areas of application
- Concert Lighting
- Club & Disco
- Stage & Theatre
- Studio, TV, & Film
- Architecture & Architainment
Safety advice
Because of their high luminance, UV radiation and high internal pressure during operation, HTI lamps may only be operated in enclosed lamp casings specially constructed for the purpose. Appropriate filters must ensure that UV radiation is reduced to an acceptable level. Mercury is released if the lamp breaks. Special safety precautions must be taken. Information on safety and handling is available on request or can be found in the leaflet included with the lamp or in the operating instructions.
Because of their high luminance, UV radiation and high internal pressure during operation, HTI lamps may only be operated in enclosed lamp casings specially constructed for the purpose. Appropriate filters must ensure that UV radiation is reduced to an acceptable level. Mercury is released if the lamp breaks. Special safety precautions must be taken. Information on safety and handling is available on request or can be found in the leaflet included with the lamp or in the operating instructions.
Technical Data
General Product Information
Lamp type
SINGLE END
Product remark
Special GY22 base. The ignition voltage may be applied only to the thin pin/XS = eXtreme Seal (maximum permissible foil temperature 450 °C)/Important: The contact pins of the base are short-circuited; the electrode farthest from the base is connected via cable
Global order reference
HTI 2500 W/SE XS
Electrical Data
Nominal wattage
2500 W
Nominal voltage
105 V
Ignition voltage
8.0 / 45 kVp
Nominal current
23.8 A
Type of current
AC
Photometric Data
Luminance
30000 cd/cm²
Nominal luminous flux
240000 lm
Luminous efficacy
95 lm/W
Color temperature
6000 K
Color rendering index Ra
90
Light center length (LCL)
85.0 mm
Physical Attributes & Dimensions
Electrode gap (cold)
14.0 mm
Lamp base
G22
Diameter
33.0 mm
Diameter (in)
1.299 in
Length
180.0 mm
Connector: presence
Yes
Product weight
138.00 g
Operating Conditions
Burning position
Other
Cooling
Forced
Max. permitted ambient temp. pinch point
450 °C
Lifetime Data
Nominal lifetime
600 hr
Environmental & Regulatory Information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Primary article identifier
4050300371146
Declaration no. in SCIP database
3978605c-1e11-462a-9ec2-94ccc12ef473
Candidate list substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe use instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4050300371146 |
VS
| 1 | 305mm x 82mm x 115mm | 287.00g | 2.88dm³ |
Country specific information
EAN |
METEL code |
|---|---|
| 4050300371146 | OSRHTI2500SE |